Sand to Power · workbook
Week 3: Photovoltaics: series, parallel and real systems
Lessons
- Volts, amps and watts, The three words you need for every solar conversation.
- Series and parallel, Two ways to connect panels, and what each one changes.
- Shade, heat and cold mornings, Why one leaf matters and why the coldest day sets the limit.
- Real systems: grid-tie, off-grid, hybrid, Three kinds of system and the parts each one needs.
- Simulation: the Wiring Bench, Wire real panels, shade them and protect the charger.
- Put it to work, Plan a safe system for your own home.
- Week 3 checkpoint, Three questions to lock in the week.
Key words
- Volt (V)
- The ‘push’ of electricity.
- Amp (A)
- The amount of electricity flowing.
- Watt (W)
- Power: volts × amps. How fast energy is made or used.
- kWh (kilowatt-hour)
- A unit of energy: 1,000 watts used for one hour. Electricity bills are counted in kWh.
- Voc (open-circuit voltage)
- A panel's voltage when nothing is connected. It's the highest voltage it makes, higher when cold.
- Isc (short-circuit current)
- A panel's current when its + and − are joined directly. The most current it can give.
- Maximum power point (MPP)
- The one combination of volts and amps where a panel gives the most power.
- Temperature coefficient
- How much a panel's voltage or power changes per °C. Panels lose power when hot and gain voltage when cold.
- DC (direct current)
- Electricity flowing one way. Panels and batteries make DC.
- AC (alternating current)
- Electricity that switches direction many times a second. Wall sockets and the grid use AC.
- Inverter
- A device that changes panels' or batteries' DC into AC for home appliances or the grid.
- kWp (kilowatt-peak)
- The size of a solar system: its power in standard full sun. 10 panels of 410 W = 4.1 kWp.
- Series
- Connecting things end-to-end (+ to −). Voltages add, current stays the same.
- String
- A group of panels wired in series.
- Parallel
- Connecting all + together and all − together. Currents add, voltage stays the same.
- Wire size (gauge / mm²)
- How thick a wire is. More current needs thicker wire or it overheats.
- Fuse / breaker
- A safety part that cuts the circuit if too much current flows.
- I–V curve
- A graph of a panel's current against its voltage. Its shape shows shade and faults.
- MPPT (maximum power point tracker)
- Electronics inside chargers and inverters that keep panels at their maximum power point.
- Charge controller
- A device between panels and a battery that charges safely and stops at full.
- Hot spot
- A shaded or broken cell forced to carry current backwards; it heats up and can burn the panel.
- Bypass diode
- A one-way electrical valve in the junction box that lets current go around a shaded part of a panel.
- Grid-tie
- A system that sends solar power into the utility grid, usually with no battery.
- Off-grid
- A system not connected to the utility grid; it needs batteries for night.
- Grounding / earthing
- Connecting metal frames to the earth so a fault can't make them live.
- Permit / interconnection
- Official approval to install a system or connect it to the grid.
Worked examples
Volts, amps and watts
How much energy in a day?
A 4.1 kWp system gets 5 peak sun hours on a good day and loses about 14% to heat, wiring and the inverter. How many kWh?
- 4.1 kW × 5 h = 20.5 kWh.
- 20.5 × (1 − 0.14) ≈ 17.6 kWh.
Answer: About 17.6 kWh, enough for a fridge, lights, fans and a TV for a day, with some to spare.
Now try your own numbers:
Series and parallel
Two strings of two
You wire 2 panels in series, then put 2 of those strings in parallel. Each panel is 37.5 V and 13.9 A.
- Series: 2 × 37.5 = 75 V.
- Parallel: 2 × 13.9 = 27.8 A.
- Power: 75 × 27.8 ≈ 2.1 kW.
Answer: 75 V at 27.8 A, about 2.1 kW. Try other layouts below.
Now try your own numbers:
Shade, heat and cold mornings
How many in series?
Your charge controller allows 250 V. The panel's Voc is 37.5 V. Your coldest morning is −12 °C.
- Rise: 0.26% × (25 − (−12)) = 0.26% × 37 ≈ 9.6%.
- Cold Voc per panel: 37.5 × 1.096 ≈ 41.1 V.
- 250 ÷ 41.1 ≈ 6.08 → 6 panels maximum.
Answer: Six panels at most. In Chicago (−27 °C) it drops to five. Try your city below.
Now try your own numbers:
My action plan
Ideas from “Put it to work”: Start safe with a 12 V portable kit (panel, charge controller, small LFP battery) for lights and phones. · For a home system, list your loads, then use Lesson 3.3's calculator to check strings against the inverter you're quoted. · Ask your installer for the string-sizing sheet and coldest-temperature used.
One thing I learned that surprised me
One step I'll take in the next 30 days
Who I'll talk to (installer, electrician, partner, lender)
What I still need to find out
For learning only. Check local codes and use qualified professionals for electrical and battery work.
