Sand to Power · workbook
Week 1: From sand to silicon wafers
Lessons
- Why start with sand?, What a solar panel is really made of, and why only special quartz works.
- Turning quartz into silicon metal, How an arc furnace pulls oxygen off quartz, and what it costs in power.
- Purifying: the energy hog, Why polysilicon uses the most energy of any step, and who makes it.
- Growing crystals and slicing wafers, From pure chunks to a perfect crystal to slices thinner than a fingernail.
- Simulation: run the Silicon Hall, Run all four machines yourself and complete five missions.
- Put it to work, What you can actually do with this knowledge, from home to business.
- Week 1 checkpoint, Three questions to lock in the week.
Key words
- Silicon
- The element (Si) left after oxygen is removed from silica. It turns light into electricity in solar cells.
- Solar cell
- A treated wafer with metal lines printed on it. Light knocks electrons loose and the lines collect them as current.
- Quartz
- A hard, clear mineral made of silicon and oxygen (SiO₂). Lumps of very pure quartz are the starting rock for solar panels.
- Silica (SiO₂)
- Silicon joined to oxygen. Sand, quartz and glass are mostly silica.
- Wafer
- A slice of silicon thinner than a fingernail (about 0.13 mm) cut from an ingot. Each wafer becomes one cell.
- Arc furnace
- A furnace heated by giant electric sparks between carbon electrodes, reaching about 2,000 °C.
- Silicon metal
- Silicon about 98–99% pure, made in an arc furnace. Used for aluminum alloys, chemicals and as the feed for polysilicon.
- Polysilicon
- Silicon purified to 99.9999999% (9N) or better, grown as rods in a reactor. The pure feed for solar wafers.
- Ingot
- A large solid block or cylinder of silicon grown from melted polysilicon.
- Electrode
- A thick carbon rod that carries electricity into the furnace.
- Carbon
- The element in coal, charcoal and wood chips. In the furnace it pulls oxygen off the silica.
- Smelting
- Heating rock with a carbon fuel until it melts and the metal separates out.
- kWh (kilowatt-hour)
- A unit of energy: 1,000 watts used for one hour. Electricity bills are counted in kWh.
- Siemens process
- The main way polysilicon is made: silicon is turned into a gas (trichlorosilane), cleaned, then deposited back onto hot rods.
- Trichlorosilane
- A liquid/gas form of silicon joined to chlorine and hydrogen. Easy to purify by distilling. Toxic and flammable.
- 9N (nine nines)
- Purity of 99.9999999%: only one foreign atom per billion.
- Purity
- How much of a material is the thing you want, as a percentage. Tiny impurities ruin solar cells.
- Dopant
- A tiny, deliberate amount of another element (boron, phosphorus, gallium) added to silicon so it can carry charge.
- Czochralski (CZ) method
- Growing a single perfect crystal by slowly pulling a seed upward from melted silicon while turning it.
- Single crystal (monocrystalline)
- Silicon whose atoms line up in one unbroken pattern. Makes the most efficient cells.
- Wire saw
- A machine that slices ingots into thousands of wafers at once using a fast-moving, diamond-coated wire.
- Kerf
- The width of the cut a saw makes. The silicon in the kerf turns into dust and is lost.
- Carbon footprint
- The greenhouse gas released to make or do something, counted as kg of CO₂.
Worked examples
Why start with sand?
How much rock for a 1 MW village array?
A village wants 1 MW of panels. Using the ratio from the last slide (7,400 t of quartz per 1,000 MW), how much quartz started that journey?
- 1 MW is 1/1,000 of 1,000 MW.
- 7,400 t ÷ 1,000 = 7.4 t.
Answer: About 7.4 metric tons of quartz, roughly one small truckload.
Now try your own numbers:
Turning quartz into silicon metal
The furnace’s power bill
A furnace makes 1,000 kg of silicon metal using 12 kWh/kg. Power costs $0.08 per kWh. What is the electricity bill?
- Energy: 1,000 kg × 12 kWh/kg = 12,000 kWh.
- Cost: 12,000 × $0.08 = $960.
Answer: $960 of electricity per metric ton. At $0.25/kWh (common on islands) it would be $3,000.
Now try your own numbers:
Purifying: the energy hog
Power price and polysilicon
Polysilicon needs about 0.15 kWh per watt of panel. How much does it add to each watt if power costs 5¢ vs 25¢ per kWh?
- At 5¢: 0.15 × $0.05 = $0.0075 per watt.
- At 25¢: 0.15 × $0.25 = $0.0375 per watt.
Answer: 0.75¢ vs 3.75¢ per watt. Imported panels sell near 11¢/W, so expensive power alone can sink a polysilicon plant.
Now try your own numbers:
Growing crystals and slicing wafers
Silicon lost to dust
Wafers are 130 µm thick and the wire cut is 60 µm wide. What share of the silicon becomes dust?
- Each wafer uses 130 + 60 = 190 µm of ingot.
- Dust share = 60 ÷ 190 ≈ 0.32.
Answer: About 32% of the purified silicon is lost to dust. Try your own numbers below.
Now try your own numbers:
My action plan
Ideas from “Put it to work”: Read a panel's spec sheet: find the cell type (mono, TOPCon) and the country of each step if listed. · When buying, ask the seller where the cells were made, as well as the panel. · Invite a local geologist or university to talk about quartz deposits in your area.
One thing I learned that surprised me
One step I'll take in the next 30 days
Who I'll talk to (installer, electrician, partner, lender)
What I still need to find out
For learning only. Check local codes and use qualified professionals for electrical and battery work.
