Bonus

Sand to Power · workbook

Bonus: Test your panels on real houses

Name:Date:

Lessons

  1. Reading the sun, Where the sun goes and how much falls on your city.
  2. Reading a roof, Direction, angle, shade and spacing.
  3. Simulation: the Rooftop Lab, Place panels on real houses under real sun.
  4. Put it to work, Check your own roof before you buy.
  5. Rooftop checkpoint, Questions to lock in the module.

Key words

Solar noon
The moment the sun is highest in the sky. Not always 12:00 on the clock.
Irradiance (W/m²)
How strong sunlight is right now. Full sun ≈ 1,000 W per square metre.
Insolation / peak sun hours
The total sunlight in a day, often given as ‘peak sun hours’ of 1,000 W/m².
Specific yield (kWh/kWp)
Energy a year from each 1 kWp of panels at a place. Lets you compare cities.
PVGIS
A free European Commission tool that gives real sunshine and solar yield for almost any place on Earth.
Azimuth
The compass direction a panel faces (south = 180°).
Tilt
The angle of a panel from flat. Roughly equal to the latitude gives the most yearly energy.
Latitude
How far north or south of the equator a place is, in degrees.
Shading loss
Energy lost because trees, tanks or buildings block sun from panels.
Racking / mounting
The rails, clamps and feet that hold panels to the roof.
Ballast
Heavy blocks holding panels on a flat roof without drilling.

Worked examples

Reading the sun

Panels for a home

A home in Atlanta uses 3,500 kWh a year. Yield is 1,446 kWh per kWp. Panels are 410 W.

  1. Size: 3,500 ÷ 1,446 ≈ 2.42 kWp.
  2. Panels: 2,420 W ÷ 410 W ≈ 5.9 → 6 panels.

Answer: Six panels (before shade). Try your city's yield below.

Now try your own numbers:

Reading a roof

Row spacing on a flat roof

Panels 1.72 m long tilted 15°. The lowest winter sun you care about is 25° high.

  1. Panel height: 1.72 × sin 15° ≈ 0.45 m.
  2. Shadow length: 0.45 ÷ tan 25° ≈ 0.95 m.

Answer: Leave about 0.95 m between rows.

Now try your own numbers:

My action plan

Ideas from “Put it to work”: Use PVGIS (free) to find your city's yield. · Photograph your roof at 9 a.m., noon and 3 p.m. to map shade. · Get at least two quotes and compare kWp, yield estimate and warranty.

One thing I learned that surprised me

One step I'll take in the next 30 days

Who I'll talk to (installer, electrician, partner, lender)

What I still need to find out

For learning only. Check local codes and use qualified professionals for electrical and battery work.