Sand to Power · workbook
Bonus: Lithium batteries for the home and the road
Lessons
- Inside a lithium battery, Cells, chemistries and how a battery stores energy.
- Sizing a home battery, From your loads to the right number of cells.
- Building it safely, Grading, torque, BMS, fuses and certification.
- Batteries: who makes what, where, From lithium mines to packs, and the realistic local steps.
- Simulation: the Pack Bench, Grade, build, protect and test a 48 V pack.
- Put it to work, Choosing, buying or building batteries responsibly.
- Battery checkpoint, Three questions to lock in the module.
Key words
- Lithium-ion battery
- A rechargeable battery where lithium ions move between two electrodes. Used in phones, cars and homes.
- Battery cell
- The smallest battery unit. A lithium iron phosphate cell gives 3.2 volts.
- Cathode
- The positive electrode. Its material (LFP, NMC) gives the battery its name.
- Anode
- The negative electrode, usually graphite.
- Separator
- A thin plastic film that keeps anode and cathode from touching.
- Electrolyte
- The liquid or gel that lets ions travel between anode and cathode.
- LFP (lithium iron phosphate)
- A lithium-ion chemistry using iron and phosphate. Safer, long-lasting, no cobalt, best for homes.
- Cycle
- One full charge and discharge. LFP cells last thousands of cycles.
- NMC (nickel manganese cobalt)
- A lithium-ion chemistry with more energy per kilo; common in long-range cars. Needs more careful handling.
- Sodium-ion
- A newer battery using sodium (from salt) instead of lithium. Cheaper materials, a bit heavier.
- Battery module
- Several cells connected and held together in a frame.
- BMS (battery management system)
- Electronics that watch every cell's voltage and temperature and cut power if anything goes wrong.
- Fuse / breaker
- A safety part that cuts the circuit if too much current flows.
- Battery pack
- Modules or cells plus BMS, fuse, wiring and case: the finished battery.
- Ah (amp-hour)
- How much charge a cell holds. 280 Ah can give 280 amps for one hour.
- Capacity (kWh)
- How much energy a battery stores: volts × amp-hours ÷ 1,000.
- Depth of discharge (DoD)
- How much of a battery's energy you use. Using 90% each night is DoD 90%.
- Cell grading / matching
- Measuring cells and grouping ones that are alike, so a pack ages evenly.
- Internal resistance
- How much a cell resists current. Worn or weak cells have more and heat up.
- Torque
- How tight a bolt is turned, measured in newton-meters (N·m). Loose busbar bolts heat up.
- Cell balancing
- The BMS evening out cells so all are equally full.
- Thermal runaway
- A damaged cell heating itself faster and faster until it vents or burns. The main battery danger.
- UL 9540
- The US safety listing for a complete home or business energy storage system.
- UN 38.3
- The test lithium batteries must pass before they can be shipped.
- Gigafactory
- A huge battery-cell factory making gigawatt-hours a year.
- Second-life battery
- A used car battery reused for lighter work like home storage.
Worked examples
Sizing a home battery
A battery for the night
Fridge, lights, fans and a TV average 400 W for 13 hours of darkness. Usable share is 90%, inverter efficiency 94%.
- Energy used: 400 W × 13 h = 5.2 kWh.
- Allow for DoD and inverter: 5.2 ÷ 0.9 ÷ 0.94 ≈ 6.1 kWh.
Answer: About 6 kWh nominal, e.g. 16 cells of 120 Ah. Try your own loads below.
Now try your own numbers:
My action plan
Ideas from “Put it to work”: Buy a certified LFP home battery (UL 9540 or IEC 62619 listed) installed by a qualified electrician. · Size it with the calculator in Lesson 2 for the loads you truly need in a blackout. · Put batteries on a clinic, school or community center as a blackout hub.
One thing I learned that surprised me
One step I'll take in the next 30 days
Who I'll talk to (installer, electrician, partner, lender)
What I still need to find out
For learning only. Check local codes and use qualified professionals for electrical and battery work.
